Technical Service; Troubleshooting - VWR 1000 Manual De Instrucciones

t s
ECHNICal ErvICE
For more information or technical assistance contact your local VWR representative or visit www.vwr.com.
Web resources: Visit VWR's website at www.vwr.com for:
• Complete technical service contact information
• Access to VWR's Online Catalogue, and information about accessories and related products
• Additional product information and special offers
t
roUblEsHootINg
Problem
Unit fails to power on
Unit does not shake
Unit is excessively noisy
Unit stops running after initial start-up
Cause
Missing or blown fuse
Mechanical obstruction
Drive system failure
Ceased bearing
Drive belt broken
Rattling or ticking sounds may indicate a loose
screw on the tray
Maximum load exceeded
solution
Add or replace fuse as necessary.
If problem persists, please contact your VWR representative for repair.
Remove mechanical obstruction.
If problem persists, the reason may be the drive system. Please contact your VWR
representative for repair.
Ensure that tray is secured tightly.
If problem persists, please contact your VWR representative for repair.
Ensure the load is evenly distributed and does not exceed the manimum load
capacity for the unit.
If problem persists, please contact your VWR representative for repair.
EN
6