Cleaning Instructions - Weston 07-3101-W-A Manual De Instrucciones

CLEANING INSTRUCTIONS

1. Thoroughly wash all parts in soapy water. Rinse with clean water. Dry all parts
immediately. NOTE: DO NOT immerse the Blade Assembly in sudsy water where
they cannot be seen. To prevent injury, keep the Blade Assembly visible at all
times. CAUTION: The Blades are very sharp!
2. Coat all metal parts with a food grade silicone spray.
HELPFUL HINT: A long, skinny brush is helpful when cleaning the Blade
Assembly.
ASSEMBLY INSTRUCTIONS
1. Connect the Left and Right Legs
to the Base using the provided Allen
Wrench and 4 Base Screws and Lock
Washers. FIGURE A
2. Using an Allen Wrench and 4 Leg
Screws and Lock Washers, attach
the Left and Right Legs to the Lower
Housing. FIGURE A
3. Install the Chute to the Top
Housing using an Allen Wrench
and the 2 Chute Screws and Lock
Washers. FIGURE B
6
Leg Screws (4) &
Lock Washers (4)
Allen
Wrench
Legs
Base
Allen
Wrench
Chute
Top
Housing
Allen
Wrench
FIGURE A
Lower
Housing
Base Screws (4)
and Lock Washers (4)
FIGURE B
Chute Screws (2) &
Lock Washers (2)