Paradox Grafica DNE-K07 Manual Del Usuario página 9

Option [3] OFF = Does not display Entry Delay Timer
Option [3] ON = Displays Entry Delay Timer (default)
4.5 Confidential Mode
S [002]: O
ECTION
This option is not for UL Installations.
If the Confidential Mode is enabled and actions are not performed on the
Grafica keypad for a period of time, the LCD screen will display the time,
date and all LEDs on the keypad will turn off until either a key is pressed, or
an code # is entered. The period of time in which no action is performed is
defined by the Confidential Mode Timer (Section 4.9 on page 8).
Grafica will switch from Confidential Mode to Normal Mode once a key is
pressed or a code # (PIN) is entered. In normal mode, Grafica displays the
date, time and the status of the zones for every partition assigned to the
keypad. In addition, the alarm memory, bypassed zones and troubles will
also be displayed.
S [002]: O
ECTION
Option [4] OFF = Normal Mode (default)
Option [4] ON = Confidential Mode
S [002]: O
ECTION
Option [5] OFF = Exit confidential mode by entering an code # (PIN)
(default)
Option [5] ON = Exit confidential mode by pressing any key
Section [002] option [5] will work only if option [4] in section [002] is
enabled.
4.6 Exit Delay Beep
S [002]: O
ECTION
The keypad can beep once every second or play a selected tone during the
Exit Delay Timer. During the final 10 seconds only the beep tone will be
heard (at a faster interval) to provide a final warning before the area is armed.
Option [6] OFF = Exit Delay beep is disabled
Option [6] ON = Exit Delay beep is enabled (default)
4.7 Keypad Tamper
S [002]: O
ECTION
When the keypad tamper option is enabled and the keypad's anti-tamper
[4] [5]
PTIONS AND
[4]
PTION
[5]
PTION
[6]
PTION
[8]
PTION
Grafica (English) 7