Looking After Your Machine And Dealing With Faults; Cleaning The Machine; B) Troubleshooting - Brandt TI2SLIM1 Manual De Instrucciones

Level
Wattage (W) right-
hand zone
Wattage (W) left-
hand zone

4) LOOKING AFTER YOUR MACHINE AND DEALING WITH FAULTS

a)

Cleaning the Machine

Ensure the machine is off and unplugged before cleaning.
Carry out cleaning when the plate has cooled down.
About the vitroceramic plate and the control panel:
 Lightly soiled: clean with a soft, damp cloth
 Soiled with fat: clean with a soft, damp cloth with a little toothpaste or neutral detergent
until the residues are removed
 Do not use an abrasive, flammable, acid or alkaline cleaning liquid
Note: When cleaning never clean the surface of the hob with a stiff brush.
About the air inlet and the air vent:
After a long period of use dust and other dirt may accumulate in the air inlet or the air vent. The
body of the induction cooker should be cleaned carefully with a clean, dry cloth. The dust around
the air inlet and the air vent must be cleaned with a supple brush or a cleaner.
Note: Do not immerse the induction cooker in water and do not clean it with a steam
cleaner.
b) Troubleshooting
Below you will find the inspections recommended for the defects encountered most often:
Do not dismantle the machine yourself to avoid any danger or deterioration of the
induction cooker.
1 2 3
120 300 500
120 200 400
4 5 6
800 1000 1200
500 700 900
26
7 8 9
1400 1600 1800
1000 1100 1300
10
2000
1400