Checking For Blockages; Bottom Of Floor Nozzle - Shark Slim Upright NV200 Serie Manual De Instrucciones

MAINTENANCE - CONT.
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing.
WARNING: When
cleaning brushroll,
be sure to not cut
anything other than
hair, string, fibers, or
other debris.
TIP: Ensure the bottom
of the floor nozzle is
completely sealed and
locked before using.
TIP: You do not need any
tools to open the floor
nozzle—just a coin.

CHECKING FOR BLOCKAGES:

HOSE AND TUBES
1
Remove floor nozzle and wand.
2 Check all intake openings on the dust cup for blockages.
Then remove dust cup and hose to check intake opening
and hose elbow for blockages.
15
1-800-798-7398
STEP 1 STEP 2 STEP 1
STEP 2

BOTTOM OF FLOOR NOZZLE

1
Open the three locks on the bottom of
the floor nozzle. To open each lock, insert
the edge of a coin into the slot and turn
counterclockwise.
2 Lift tabs and pull up to expose the airway,
then tilt the nozzle neck back to straighten.
Use a flashlight to check for blockages in
the airway.
STEP 3
3 Remove any string, carpet fibers, or hair
that may be wrapped around the brushroll.
To loosen debris, run scissors along the
groove in the brushroll. To close the nozzle,
push down until it clicks into place, then
fasten the locks with a coin.
s h a r kc l e a n . c o m
16