Battery Replacement - Sonos Bundle 250 Guía De Producto

Sonos Bundle 250
will turn orange, indicating that a reset is in process. It will take a few minutes for the
Controller screen to wake up.

Battery Replacement

After several years (depending upon usage), the battery on your Controller may not
hold a charge as long as it once did. You can purchase a replacement battery (visit
our Web site at www.sonos.com for more information), and then follow the
instructions below to replace the battery.
Caution: Risk of explosion if battery is replaced by incorrect type.
Dispose of used batteries according to the instructions. (Check with
your local waste or recycling company to determine the proper disposal
method in your area.)
Remove the battery door on the back of your Controller 200.
1.
Remove the existing battery by gently pulling the gray battery tab toward you to
2.
dislodge the battery, and then lift up to remove.
Remove the protective wrap from the new battery.
3.
Insert the battery into the battery compartment with the Sonos logo facing out,
4.
making sure the battery snaps gently into place.
Close the battery door.
5.
Place the Controller 200 into the charging cradle to wake it up.
6.
Slide the battery door
back, and then lift it off
23