Over-Temperature Protection - Blaupunkt 5RE64360 Montaje Y Modo De Empleo

Touch the timer control, the timer indicator show "10"
Adjust the timer setting by touch the "-" or "+" control. The
minute minder indicator will start flashing and will show in the
timer display.
Touching the "-" and "+" together, the timer is cancelled, and the
"--" will show in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator will
flash for 5 seconds
Setting the timer to turn more than one cooking zone off
1. If more than one heating zone use this function, the timer indicator will show the lowest time.
(e.g. zone 3# setting time of 10minutes, zone 4# setting time of 5 minutes, the timer indicator shows
"5".)
NOTE: The red dot next to power level indicator will flash
2. When cooking timer expires, the corresponding
cooking zone will be switch off automatically.
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is selected.
b) If you want to change the time after the timer is set, you have to start from step 1.

3.3.5 Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
(set to 10 minutes)
(set to 5 minutes)
10