Festo DNCM-POT Serie Instrucciones De Utilizacion página 22

DNCM−...−POT
When fitting accessories onto the piston rod:
Use the pivot with cheeks 6 on the piston
S
rod as counter force.
Fitting against the force of the quasi−rigid
connection with the coupling plate will
damage the measuring system.
Use an external guide for the work load.
S
This will prevent lateral loadings on the
piston rod aJ.
Lateral loadings will falsify the measuring
results and possibly damage the measur
ing system.
When fastening the work load:
Use only the piston rod thread.
S
Fastening the work load to the coupling
plate or the connecting rod will damage
the measuring system and possibly make
it inoperable.
When using additional proximity switches:
Place the proximity switches in the ap
S
propriate grooves 3 in the end posi
tions.
Cover rails over the grooves will protect
the cables from dirt.
Use cover rails in all unused grooves in
S
accordance with the section Acces
sories."
22
Ó Ó Ó Ó Ó
Fig. 8
Ó Ó Ó Ó Ó
Fig. 9
Fig. 10
Festo DNCM−...−POT 0608a English