Needle Threader; Drawing Up The Bobbin Thread - Baby Lock Joy BL25B Instruccion Y Quia De Referencia

z
q
x
c
z
q
x
w
c
w
e
q

Needle Threader

z Raise the needle to its highest position.
Pull down the needle threader knob as far as it will go.
q Threader knob
x Turn the knob in the direction of the arrow in the
illustration, then insert hook into the needle eye.
Lead the thread around guide and under hook.
w Hook
e Guide
c Turn the knob in the direction of the arrow in the
illustration, drawing the thread loop through the
needle.
Pull the thread through the needle eye.
NOTE:
The needle threader can be used with a #11 to #16
needle, a blue tip needle or a #11 to #16 ball point
needle. Thread size 50 to 90 should also work well.

Drawing up the Bobbin Thread

z Raise the presser foot and hold the needle thread
lightly with your left hand.
q Needle thread
x Turn the handwheel slowly toward you one complete
turn. Bring the bobbin thread up by pulling the needle
thread as illustrated.
q Needle thread
w Bobbin thread
c Pull 4˝ (10 cm) of both threads back and under the
presser foot.
26