z
q
x
w
c
v
r
b
CARE AND MAINTENANCE
Cleaning the Hook Race and Feed Dog
z Remove the presser foot and needle. Remove screw
x Lift up the bobbin holder and remove it.
c Brush out dust and lint. Wipe the bobbin holder with a
e
v Clean the feed dogs and hook area with the lint brush.
b Wipe the hook race with a soft, dry cloth.
t
64
WARNING:
Turn the power switch off and unplug the machine
before cleaning.
NOTE:
• Do not dismantle the machine in any way other than
what is explained in this section.
• Do not store the machine in a high-humidity area
near a heat radiator, or in direct sunlight.
• Clean the outside of the machine with a soft cloth.
on the needle plate with the screwdriver.
Remove the needle plate and take out the
bobbin.
q Screw
w Bobbin holder
soft, dry cloth.
e Lint brush
r Feed dogs
r Hook race
NOTE:
You may also use a vacuum cleaner.