Disposal; Technical Data And Operating Limits; Maximum Verification Scale Interval; Maximum Permissible Load - Mettler Toledo PFA Serie Manual Del Usuario

A
B
C
D
30290627D PFA-series

4.5 Disposal

In conformance with the European Directive 2002/96 EC on Waste Electrical and Electronic
Equipment (WEEE), this device may not be disposed of with domestic waste. This also
applies to countries outside the EU, according to their specific requirements.
➜ Please dispose of this product in accordance with local regulations at the collecting
point specified for electrical and electronic equipment.
Disposal of pneumatic springs
• The pneumatic springs must not be opened or heated.
• The pneumatic springs may only be opened according to the manufacturer's
instructions.
• The oil filling of the pneumatic springs must be disposed of according to the
manufacturer's instructions.

5 Technical data and operating limits

5.1

Maximum verification scale interval

The verification scale interval depends on the load cell and scale configuration. The
maximum verification scale interval is given below.
Max. verification
scale interval [e]
3 x 3000 e
Multi Range
max / e [kg]
1 x 6000 e
Single Range [kg]

5.2 Maximum permissible load

All weighing platforms are equipped with an overload protection. However, if the load
exceeds the maximum permissible load, damage of mechanical parts may occur.
The static load-bearing capacity, i.e. the maximum permissible load, is dependent on the
type of loading (positions A – D).
PFA57_-
Position
A central load
B side load
C one-sided corner load
D drive over
Capacity
300 kg 600 kg 1200 kg
150 / 0.05
– 300 / 0.1
600 / 0.2
0.05 0.1 0.2
all sizes D/DS/E/ES/FL/FM
300/600 1200/1500/3000
1500 kg
900 kg
450 kg
400 kg
1500 kg 3000 kg
300 / 0.1 600 / 0.2
– 600 / 0.2 1500 / 0.5
1500 / 0.5 3000 / 1.0
– 0.5
G/FH
1200/1500/3000
4500 kg 3500 kg
3000 kg 2300 kg
1500 kg 1150 kg
800 kg 800 kg
Technical data and operating limits
15