Connect Electrical Supply; Check The Installation; Removing Appliance - Gaggenau VI 424 610 Instrucciones De Instalación

3
Only for flush mounting:
Check appliance for functionality first (see
section "Check the installation").
Fill in the gap between the worktop and the
ceramic hob using a suitable commercial silicone
bonding agent in a color of your choice. Please
observe the manufacturer's instructions for use.
Apply the silicone bonding agent in the joints.
Before the silicone bonding agent starts to form a
skin, moisten a blade or your finger with a soapy
solution and smooth it over.
Don't turn on the appliance until after the silicone
adhesive has completely dried (at least 24 hours,
depending on room temperature).
9
CAUTION
Unsuitable silicone adhesive will cause natural
stone countertops to become permanently
discolored.

Connect Electrical Supply

Refer to data plate for more information. See "Service"
for data plate location.
The branch-circuit breakers ampacity, the wire sizes
and the connections must be conform to the
requirements of the National Electrical Code or
Canadian Electrical Code and all local codes and
ordinances.
Attach flexible conduit to the junction box. Connect
the lead wires to the junction box supply wires in
proper phase:
▯
black (L1) to black
▯
red (L2) to red
▯
green or bare to ground

Check the Installation

9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the
OFF position.
Remove everything from the cooktop surface. Clean
cooktop surface with cooktop cleaning creme.
Switch on the circuit breaker.
Verify that elements function properly.
When the light rings behind the control knobs blink,
the connecting cable between the control console and
the appliance isn't plugged in correctly. Disconnect
the appliance from power and ensure that the
connecting cable is correctly fitted.

Removing appliance

Disconnect the appliance from the power supply. For
flush-mounted appliances, remove the silicone joint.
Push out the appliance from below.
9
CAUTION
Damage to appliance! Don't lever device out
from above at the frame.
11