Installation Of Control Console; Install Appliance - Gaggenau VI 424 610 Instrucciones De Instalación

Installation of control console

Note: Only install the appliance in conjunction with
the corresponding control console.
1 Remove the packaging of the control knobs and
the protective film from the light rings.
2 Hold the retaining plate against the front panel
from behind. Stick the control knobs into the
holes from the front and screw it tight from
behind with the nuts. Make sure that the control
knobs are correctly arranged.
3 Screw the control console tight to the retaining
plate using the nuts included.

Install Appliance

9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the
OFF position.
10
1 Remove plug protection on the underside of the
stovetop. Connect control console cable with
socket according to the figure. Plug must engage.
Fix grounding with the screw enclosed and fix
cable in the strain relief. Fit plug protection again.
2 Evenly insert appliance into cut-out. Press
appliance firmly into the cut-out.
9
CAUTION
Don't kink or pinch connecting cable.