LaserLiner Duraplane G360 Manual De Usuario página 16

1
Use of lithium-ion rechargeable battery
– The power supply unit is to be used in enclosed spaces only; do not expose
to moisture or rain as this may result in the risk of electric shock.
– Charge the device's battery completely prior to use. Then insert the battery
into the device (see section 2: power supply).
– Connect the power supply unit to the mains and the connecting socket (5)
(see section 2: power supply). Only use the power supply unit provided.
Using a different power supply unit will invalidate the warranty.
– Once the battery has been inserted, the LEDs light up in sequence to
indicate the battery's charge (8). Charging is complete once all 4 LEDs
are lit green.
– The battery can also be charged while using the device.
– The lower LED on the power indicator (4) flashes if the battery charge is low.
– Disconnect the power pack from the mains when the device is not in use.
The battery may only be charged with the power supply unit
!
provided and used only with this laser device. Any other use
may cause injury or fire.
Make sure there are no conductive objects in the vicinity of the
!
battery contacts. Short-circuiting of these contacts can cause burn
injuries or fire.
!
Do not open the rechargeable battery. This could cause short-circuits.
Never use extension cables in conjunction with the battery charger,
!
or similar accessories not approved by the manufacturer, as this may
result in a fire risk, the risk of an electric shock or personal injury.
16
EN