Descargar Imprimir esta página

Technical Characteristics - Coleman 2510 Serie Instrucciones De Uso

Publicidad

Idiomas disponibles

Idiomas disponibles

DANGER
CARBON MONOXIDE HAZARD
• This lantern is a combustion
appliance. All combustion
appliances produce carbon
monoxide (CO) during the
combustion process. This product
is designed to produce extremely
minute, non-hazardous amounts
of CO if used and maintained in
accordance with all warnings and
instructions. Do not block air flow
into or out of the lantern.
• Carbon Monoxide (CO) poisoning
produces flu-like symptoms, watery
eyes, headaches, dizziness, fatigue
and possibly death. You can't see
it and you can't smell it. It's an
invisible killer. If these symptoms
are present during operation of this
product get fresh air immediately!
• For outdoor use only.
• Never use inside house, camper,
tent, vehicle or other unventilated
or enclosed areas. This lantern
consumes air (oxygen) and
produces carbon monoxide
(CO). Do not use in unventilated
or enclosed areas to avoid
endangering your life.
WARNING
Not for home or recreational vehicle
use. We cannot foresee every use
which may be made of our products.
Check with your local fire safety
authority if you have questions
about use. Other standards govern the
use of fuel gases and heat producing
products for specific uses. Your local
authorities can advise you about these.
• Never refill disposable cylinders.
• Use the preset regulator that came
with the lantern. Do not attempt
to adjust.
• Use only Coleman
parts. During lantern set-up, check
all fittings for leaks using soapy
water. Never use a flame.
accessories or
®
English - 3
Technical
Characteristics
Input: 5,000 BTU/h
Category: Pressure regulated propane
Fuel: 16.4 oz. disposable propane
cylinders
Regulator: 2600
To Set Up
DANGER
CARBON MONOXIDE HAZARD
• For outdoor use only.
• Never use inside house, camper,
tent, vehicle or other unventilated
or enclosed areas. This lantern
consumes air (oxygen) and produces
carbon monoxide (CO). Do not use
in unventilated or enclosed areas to
avoid endangering your life.
CAUTION
SERVICE SAFETY
• Keep all connections and fittings
clean. Inspect propane cylinder and
lantern propane connections for
damage before attaching.
• During set up, check all connections
and fittings for leaks using soapy
water. Bubbles indicate a leak. Never
use a flame.
■ Remove lantern parts from package.
Be sure to remove the foam wrap
that surrounds the globe and the four
foam spacers that are located on the
chrome-plated rails. It is not necessary
to disassemble the Ventilator and
Globe Frame Assembly.
Reflector
Igniter
Electrode
Burner Assembly
Mantle
Base
Ventilator and Globe
Frame Assembly

Publicidad

loading