Changing The Preset Programmes; Running Your Programme; User Overrides; Altering Display To Show Time Or Room Temperature - Danfoss TP4000 Range Instrucciones De Usuario

Ocultar thumbs Ver también para TP4000 Range:

2.2 Changing the preset programmes

a) Press PROG until 1st pre-set time and

temperature appears in display.

b) Use + or – buttons to adjust the TIME

(press and hold to change in 10 min

increments).

c) Use Λ or V buttons to adjust the

TEMPERATURE.

d) Press PROG to move to next preset time &

temperature (Event 2).

e) Repeat steps b, c & d for programming

Events 3, 4, 5 & 6.

Note: Press and hold PROG at any time will

make the unit return to RUN mode.

Press PROG – the colon in the LCD display

will start to ﬂ ash. The heating will now be

controlled with the programmed times and

temperatures.

Sometimes you may need to change the way you use your heating

temporarily, e.g. due to unusually cold weather. The TP4000 has several

user overrides, which can be selected without aﬀ ecting the thermostat

programming.

TP4000

Tabla de Contenido