Installation Instruction - EAS ELECTRIC EMEGW20L Manual De Instrucciones

Ocultar thumbs Ver también para EMEGW20L:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instruction

The following must be noted
Electrical connection
The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket. Only
a qualified electrician who takes the appropriate
regulations into account may install the socket or
replace the connecting cable. If the plug is no longer
accessible following installation, an all-pole isolating
switch must be present on the installation side with a
contact gap of at least 3 mm. Contact protection must
be ensured by the installation.
Fitted units
The installation cabinet must not have a back panel
behind the appliance. Minimum installation height:
850 mm.
Ventilation slots and intakes must not be covered.
Appliance in a wall-hanging unit - Fig. 1A
Appliance in a tall unit - Fig.1B
Installing the oven - Fig. 2
Note: Do not trap or kink the mains lead.
42

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Emegn20l

Tabla de contenido