Important Charging Notes - Lincoln B Serie Manual Del Usario

Model 1400, 1440, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun

Important Charging Notes

1. Longest life and best performance can be
obtained if the battery pack is charged when
the air temperature is between 65° F and
75° F (18° - 24° C). DO NOT charge the
battery pack in an air temperature below
+40° F (+4.5° C) or above 105° F (+40.5°
C). This is important and will prevent seri-
ous damage to the battery pack.
2. The charger and battery pack may become
warm to the touch while charging. This is
a normal condition, and does not indicate a
problem.
3. If the battery pack does not charge properly:
a. Check current at receptacle by plugging
in a lamp or other appliance.
b. Check to see if the receptacle is con-
nected to a light switch which turns power
off when you turn out the lights.
c. Move charger and battery pack to a loca-
tion where the surrounding air tempera-
ture is approximately 65° F - 75° F (18
- 24° C).
d. If charging problems persist, take the
tool, battery pack and charger to your
local service center.
4. The battery pack should be recharged when
it fails to produce sufficient power on jobs
which were easily done previously. DO NOT
CONTINUE to use under these conditions.
Follow the charging procedure. You may
also charge a partially used pack whenever
you desire with no adverse affect on the
battery pack.
5. Under certain conditions, with the charger
plugged into the power supply, the exposed
charging contacts inside the charger can
be shorted by foreign material. Foreign
materials of a conductive nature such as,
but not limited to, steel wool, aluminum foil,
or any buildup of metallic particles should
be kept away form charger cavities. Always
unplug the charger from the power supply
when there is no battery pack in the cavity.
Unplug charger before attempting to clean.
6. Do not freeze or immerse charger in water
or any other liquid.
Page Number - 12
Don't allow any liquid to get inside charger.
Electric shock may result. To facilitate the
cooling of the battery pack after use, avoid
placing the charger or battery pack in a
warm environment such as a metal shed or
an uninsulated trailer.
Never attempt to open the battery pack for
any reason. If the plastic housing of the
battery pack breaks or cracks, return to a
service center for recycling.
1410 or 1410E
Battery Charger
Figure 5
1401
Battery
Form 402103