Transport, Delivery And Assembly Of The Machine - IRTEC G/F8 Manual D’INstruccion De Utilizo Y Manutencion

1.2

TRANSPORT, DELIVERY AND ASSEMBLY OF THE MACHINE

Due to freight height and space limitations, some assembly may be required
with your newly purchased micro traveler. Be sure to follow proper procedures
when unloading and assembling the machine to avoid any danger or injury.
Hooks are provided on the machine see (fig.6) to enable you to pick up the
machine for unloading, assembly or repair.
If the machine is delivered with assembled
reel frame, carry out the unloading opera-
tion by hooking as shown in (fig. 7 a , 7 b).
The machine can be delivered in different versions (with different components).The
following instructions concern the machine with the highest number of components, in
case some of these components have already been assembled, follow the specific
instructions.
1) Assemble the wheel hubs and tighten the clamping bolts (pos.a).
Fig.8
2) Adjustment of the wheels width for machines equipped :
2 wheels ( fig. 8)
2 wheels
12.5/ 80 - 15.3
STANDARD
400 / 60 - 15.5
OPTIONAL
3) Check the wheel nuts are tight
(fig.10). Carry out this inspection peri-
odically.
4) Check the reel turntable bolts are tight
(fig.11).
5) Assemble the trolley lifting arms with
relevant accessories (fig.12).
Fig.7a
Inspections to be carried out during assembly:
(a)
X min
X max
X min X max
1960 2100
2040 2100
Wheel Type
10.0/ 75 - 15.3
11.5/ 80 - 15.3
12.5/ 80 - 15.3
400 / 60 - 15.5
Fig.11
Fig.6
Fig.7b
(a)
Y min
Y max
4 wheels tandem frame (fig.9)
4 wheels
10.0/ 75 - 15.3
STANDARD
11.5/ 80 - 15.3
OPTIONAL
12.5/ 80 - 15.3
OPTIONAL
400 / 60 - 15.5
OPTIONAL
Inflation pressure
Bar psi
5,2 75,4
5,6 81,2
5,5 79,8
4,7 68,2
Fig.12
Fig.9
Y min Y max
2000 2700
2000 2700
2040 2700
2040 2700
Fig.10
GB
15