Changing The Main Filter; After Finishing Work - Festool CT 36 E AC HEPA Manual De Instrucciones Original

Important: The lateral openings on the dis­
posal bag must be positioned inside the
container. Make sure that the bolt engages.
► Place the disposal bag over the edge of the
container.
Make sure that the contacts [7-1] are
free.
► Replace the top section [2-1] and close the
locking clips [2-2].
Removing the disposal bag [8]
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
2
8
► Close the disposal bag.
► Remove the disposal bag.
► Dispose of the used disposal bag in accord­
ance with statutory regulations.
► Clean the dust container [2-3].
► Replace the top section [2-1] and close the
locking clips [2-2].

10.3 Changing the main filter

NOTICE
Motor damage
► Never operate the extractor without a main
filter fitted as the motor may become dam­
aged.
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Turn the top section of the machine so that
the main filter is facing upwards (Fig.[9]).
1
3
► Fold over the lever [9-3] and remove the re­
tainer [9-2].
► Remove the used main filter [9-1] and re­
place with a new one.
► Dispose of the used main filter in accord­
ance with statutory regulations.
► Insert the retainer [9-2] and fold over the
lever [9-3] until it engages.
► Replace the top section [2-1] and close the
locking clips [2-2].
9
9-1
1
3
5

11 After finishing work

► Switch off the mobile dust extractor and
disconnect the plug.
English
9-2
9-3
2
4
15