Publicidad
Section 6
Place Fabric / Header / Side Bow Assembly onto Jeep
Step 1
Fabric / Header / Side Bow Assembly
Right Side
Step 1
Lift Fabric/ Header /Side Bow Assembly
onto top of Jeep, with the Header sitting on
top of the Jeep windshield, and the fabric
draped forward over the Jeep hood.
You may want to protect the finish of the
Jeep by putting a blanket across the Jeep
hood.
Extend the Side Bows out straight and lay
the Side Bows on top of the Door Rails.
P12 - 54822 - Rev. C 0213
Installation Instructions - Supertop NX Twill
Step 2
Side Bow Assembly
1
2
Right Side
Step 2
Release the spring-loaded catch at the end
of the bow leg by pulling out on the knob.
Slide the slotted end of the catch over the
lower leg of the Bow Mount Bracket, and
release the catch so that it snaps into place
in the hole.
Repeat on the left side.
Page 12
© 2013 Bestop, Inc.
Publicidad
