Publicidad
Section 16
Close Front Windshield Header Latches
Step 1
2
3
Pull down
1
Step 1
From inside the Jeep, locate the two
Windshield Header Latches. To close
the latch, pull down on the center of the
header and pivot the latch handle to the
completely open position to allow the hook
to engage the windshield loop. Now pivot
the hook forward to engage the windshield
loop.
P22 - 54822 - Rev. C 0213
Installation Instructions - Supertop NX Twill
Page 22
Step 2
Step 2
When the hook is engaged with the wind-
shield loop, close the latch by pivoting it
forward toward the windshield.
© 2013 Bestop, Inc.
Publicidad
