General Safeguards - GBC FOTON 30 Manual De Instrucciones

General Safeguards

• Use this laminator only for its intended purposes
as according to the specifications outlined in the
operating instructions.
• Keep hands, long hair, loose clothing and articles
such as necklaces or ties away from the front of the
feed rollers to avoid entanglement and entrapment.
• When opening the top door of the laminator, avoid
contact with the internal rollers when laminator is
powered on or shortly after the laminator has been
turned off. The rollers can reach temperatures in
excess of 260º F / 126.7° C.
• Keep hands and fingers away from the path of the
sharp film cutter blade located at the film exit.
• Do not place the laminator on an unstable cart, stand
or table. An unstable surface may cause the laminator
to fall resulting in serious bodily injury. Avoid quick
stops, excessive force and uneven floor surfaces
when moving the laminator on a cart or stand.
• Do not defeat or remove electrical and mechanical
safety equipment such as interlocks, shields and
guards.
• Do not insert objects unsuitable for lamination.
• Do not expose laminator to liquids.
CAUTION: The receptacle must be located
near the equipment and easily accessible. Do
not use an extension cord.
Electrical Safeguards
• The equipment should be connected to an easily
accessible and grounded (3-pin) receptacle (socket
outlet) near the equipment.
• This laminator must be connected to a supply voltage
corresponding to the electrical rating as indicated on
the serial plate located on the rear of the machine.
• Unplug the laminator before moving it, or when it is
not in use for an extended period of time.
• Do not operate the laminator with a damaged power
supply cord or plug.
• Do not overload electrical outlets as this can result in
fire or shock.
• Do not alter the attachment plug. This plug is
configured for the appropriate electrical supply.
• The unit is intended for indoor use only.
• Disconnect the attachment plug from the receptacle to
which it is connected and keep the power supply cord
in your possession while moving the laminator.
• Do not operate the laminator with a damaged power
supply cord or attachment plug, upon occurrence of
a malfunction, or after laminator has been damaged.
Contact an authorized GBC service representative for
assistance.
Waste Electrical and Electronic
Equipment (WEEE)
At the end of its useful life, your product is
considered to be WEEE. As such, it is important to
note that: WEEE is not to be disposed of as unsorted
municipal waste. It is to be collected separately such
that it can be disassembled so its components and
materials can be recycled, re-used, and recovered
(burned for energy content in the production of
electricity).
Public collection points have been set up by
municipalities for the collection of WEEE, free of
charge to you.
Please return your WEEE to the collection facility
nearest your home or office.
If you have difficulty locating a collection facility, the
retailer that sold you the product should accept your
WEEE.
If you are no longer in contact with your retailer,
please contact ACCO for assistance with this matter.
Recycling of WEEE is geared toward protecting the
environment, protecting human health, preserving
raw materials, improving sustainable development,
and ensuring a better supply of commodities in the
European Union. This will be achieved by retrieving
valuable secondary raw materials and reducing the
disposal of waste. You can contribute to the success
of these goals by returning your WEEE to a collection
facility.
Your product is marked with the WEEE symbol
(wheelie bin with an X through it). This symbol is to
inform you that the WEEE is not to be disposed of as
unsorted municipal waste.
Guarentee
Operation of this machine is guaranteed for two years
from date of purchase, subject to normal use. Within
the guarantee period, ACCO Brands Europe will at its
own discretion either repair or replace the defective
machine free of charge. Defects due to misuse or use
for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required.
Repairs or alterations made by persons not authorised
by ACCO Brands Europe will invalidate the guarantee.
It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect
the legal rights which consumers have under applicable
national legislation governing the sale of goods.

5