Descargar Imprimir esta página

Mellerware ROBOT 500 INOX Manual De Instrucciones página 3

Publicidad

for their safety.
2.2.5. This appliance is not a toy. Children should be su-
pervised to ensure that they do not play with the appliance.
2.3. Use and care:
2.3.1. Fully unroll the appliance's power cable before
each use.
2.3.2. Do not use the appliance if the parts or accessories
are not properly fitted.
2.3.3. Unplug the appliance from the mains power supply
when not
in use and before undertaking any cleaning task.
2.3.4. This appliance should be stored out of reach
of children.
2.3.5. Never leave the appliance unattended when in
use and keep out of the reach of children.
2.3.6. If, for some reason, the appliance were to catch fire,
disconnect the appliance from the mains power supply and
DO NOT USE WATER TO PUT THE FIRE OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only by
suitably qualified technician, and that only original spare
parts or accessories are used to replace existing parts/
accessories.
2.4.2. If the power cord is damaged, the manufacturer or
its service agent or a similarly qualified person must
replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer's liability
null and void.
3. Instructions for use
3.1. Before use:
3.1.1. Remove the appliance's protective film(if appli-
cable).
3.1.2. Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the cleaning section.
3.2. Using the stick blender:
Important: Blades are very sharp, handle with care.
3.2.1. To assemble the shaft with the motor, press the
shaft attachment into the motor housing and turn it anti
clockwise. Make sure it is fitted securely.
3.2.2. Plug the hand-held stick blender into the power
outlet using a suitable adaptor.
3.2.3. Place stick blender shaft into the food you wish to
process.
3.2.4. To operate the hand-held blender, hold the power/
start button in.
Untitled-1.indd 3
3.2.5. To stop the hand-held blender, release the power/
start button.
3.3. Using the Whisk:
3.3.1. To assemble the whisk with the adaptor fitting, insert
the whisk shaft into the adaptor reciever untill you hear it
click.
3.3.2. To assemble the whisk with the motor unit, press
the adaptor fitting into the motor housing and turn it anti
clockwise. Make sure it is fitted securely.
3.3.3. Connect the power using a suitable adaptor. To avoid
splattering, insert the whisk into the food before turning on
the power.
3.3.4. To operate the hand-held whisk, hold the power/
start button in.
3.3.5. To stop the hand-held whisk, release the power/start
button.
3.4. Using the chopping bowl:
3.4.1. Place the chopping bowl on a clean, level surface.
3.4.2. Assemble the stainless steel blade into the chopping
bowl (Ensure the blades are at the bottom).
3.4.3. Place food into the chopping bowl (Keeping max
mark in mind).
3.4.4. Note: remove the bones from meat, cut into small
pieces, then place into bowl, the max quantity of ingredi-
ents can't exceed 350g.
3.4.5. Attach the Lid onto the chopping bowl and turn it
clockwise until it locks into position
3.4.6. Attach the adaptor fitting to the motor housing as
described in point 3.3.2.
3.4.7. Place the assembled stick blender onto the chopping
bowl lid until it fits securely.
3.4.7. Plug the stick blender into the power source using a
suitable adaptor.
3.4.8. To operate the hand-held blender, hold the power/
start button in.
3.4.9. To stop the hand-held blender, release the power/
start button.
Caution: To reduce the risk of injury, never place the chop-
ping blade on the base without first putting the chopping
bowl on a secure surface. Be sure the chopping bowl lid is
securely locked in place before operating appliance.
3.5 Once you have finished using the appliance:
3.5.1. Allow appliance to cool down.
3.5.2. Unplug the appliance from the mains power supply.
3.5.3. Clean the appliance as described in the cleaning
section.
2018-11-13 08:06:39 AM

Publicidad

loading

Este manual también es adecuado para:

85550