Norms and conformity declarations
Legislation
• Our company declares that the stove
conforms to the following norms for EC
European Directive marking.
• 89/336 EC and 2004/108 EC (EMC directi-
ve) and successive amendments.
• 2006/95 EC (low voltage directive) and suc-
cessive amendments.
• 2006/42 EC (machinery directive).
• 89/106 EC (construction products).
• For installation in Italy refer to the UNI
10683/98 or successive modifications; the
technician installing the hydrothermal sani-
tary system will issue the declaration of
conformity according to L. 37/2008. The
installation of appliance has to be in accor-
dance with local and national laws and with
European norms.
• EN 60335-1 - EN 50165 - EN 50366 - EN
55014-1 - EN 61000-3-2 - EN 61000-3-3 -
EN 14785.
Installation
Flue
The flue must meet the following require-
ments:
• No other type of chimney, stove, boiler or
hood vent must be connected (Pict.1).
• It must be adequately distanced from com-
bustible or inflammable material by means
of an air cavity or opportune insulation.
Pict.1: methods for installing the flue
NO
Responsibility
The manufacturer declines every direct or
indirect, civil or penal responsibility due to:
• Poor maintenance.
• Failure to observe the instructions contai-
ned in the manuals.
• Use in non-conformity with the safety direc-
tives.
• Installation in non-conformity with the
norms in force in the country.
• Installation by unqualified or untrained per-
sonnel.
• Modifications and repairs not authorized by
the manufacturer.
• Use of non-original replacement parts.
• Exceptional events.
• Use of pellets not approved by the manu-
facturer.
• The internal section must be uniform, prefe-
rably circular: the square or rectangular
sections must have rounded corners with a
radius of no less than 20 mm, a maximum
relationship between the sides of 1.5; the
walls as smooth as possible with no nar-
rowed sections, regular curves and no
discontinuities, with deviations from the
axis not more than 45°.
NO
2
YES