Maintenance; Maintenance Schedule - Troy-Bilt TBE304 Manual Del Operador

MOVING THE UNIT
WARNING:
is delayed or when moving the unit from one location to another.
WARNING:
engine is running.
1. Stop the engine.
2. Tilt the unit back slightly to bring the blade off the ground.
3. Push or pull the unit to the next location.
WARNING:
before cleaning or maintaining the unit. Never perform cleaning or maintenance while the
unit is running. Disconnect the spark plug wire to prevent the unit from starting accidentally.
WARNING:
serious personal injury.

MAINTENANCE SCHEDULE

Perform these required maintenance procedures at the frequency stated in the table. These procedures
should also be a part of any seasonal tune-up.
NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about these
procedures, take the unit to an authorized service dealer. Refer to the Service / Warranty
Supplement for more information.
NOTE: Maintenance, replacement, or repair of the emission control devices and system may be
performed by an authorized service dealer. Refer to the Service / Warranty Supplement for more
information.
NOTE: Please read the California/EPA statement that came with the unit for a complete listing of
terms and coverage for the emissions control devices, such as the spark arrestor, muffler,
carburetor, etc.
FREQUENCY
Every 10 hours
After the first 10 hours
and at 38 hours
To prevent serious personal injury, always stop the engine when operation
To prevent serious personal injury, never pick up or carry the unit while the

MAINTENANCE

To avoid serious personal injury, always stop the engine and allow it to cool
Wear protective clothing and observe all safety instructions to prevent
MAINTENANCE REQUIRED
• Clean and re-oil the air filter. Refer to Maintaining the Air Filter.
• Change the oil. Refer to Changing the Oil.
• Have the rocker arm clearance checked by an authorized service dealer.
• Check the spark plug condition and gap. Refer to Maintaining the
Spark Plug.
23