Communication With The "External" World; Maintenance - Cleaning; Turning Off In Case Of Breaking - Unox ChefLux Manual Instrucciones

ENGLISH
4. COMMUNICATION WITH THE "EXTERNAL"
WORLD
The oven is provided of a serial gate to com-
municate with the "external" world ( for exam-
ple a PC, a pocket PC, etc.)
This gate allows you to: insert cooking pro-
grams, change some inputs in the way of
working of the oven.
The serial gate is located on the right lower
part of the oven (if you look at the oven from the
front), below the digital control panel.
5. CLEANING
WARNING:
Before starting any maintenance or clea-
ning operation it is necessary to disconnect
the electrical power supply and wait for the
appliance to cool down.
Do not use water jets to clean the equi-
pment.
5.1 First use of the oven
Before the first use of the oven: clean the
metal part with hot water and soap and rinse
it. Never wash the inner part of the oven with
acids or aggressive detergents.
Leave the cooking chamber empty and heat
it up for about 30 minutes at the temperature
of 200°C to eliminate any thermic insulation
smell.
5.2 Cooking chamber cleaning
At the end of each cooking cycle, clean the
cooking chamber using only proper products.
- To help the cleaning, remove the lateral
support pulling them out of their supports;
- Turn the oven on;
- Set the temperature at about 80°C;
- Set the steam at the maximum level for
about 10 minutes;
- Let the oven cool down and clean it with a
cloth.
Never clean the stainless steel with acids,
aggressive detergents or other product contai-
ning chlorine (sodic hypochlorite, hydrochloric
acid, etc.) even though they are diluted.
5.3 Cleaning of the external part of the oven
Never use a jet of water in pressure to clean
the external part of the oven. Use wet clothes.
5.4 Carter opening
6.

TURNING OFF IN CASE OF BREAKING

If there is a breakdown, deactivate the applian-
ENGLISH 10