Publicidad
Step 16
Refer to the enlarged diagram to identify the parts on the
å
HINGES and HINGE BRACKETS.
The DOORS may need some adjustments. Follow the text
å
below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), loosen
å
both screws that fasten the HINGE BRACKETS to the TOP.
Move the DOORS up or down to the desired location. Tighten
the screws after making adjustments.
To adjust the DOORS up and down (vertical), loosen the
å
mounting screw several turns, then turn the adjusting screw in
or out. Tighten the mounting screw after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting
å
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
Page 20
Adjusting screw
(horizontal)
(vertical adjustment)
408292
Mounting
screw (depth)
www.sauder.com/services
Publicidad
