Getting Started - Celestron Home Cast Deluxe 47023 Manual Del Usuario

GETTING STARTED

main Unit:
• Open main unit battery compartment cover (C2).
• Insert 3 x AA batteries and replace the cover.
• Use a paper clip or similar small pin to press the rEsEt button (B12) on the rear of the main unit, the unit is
now ready for use.
outdoor sensor:
• Open the battery Cover (D4) of sensor. Insert 2 x AAA batteries and replace the cover.
installation:
• Place the main Unit on any flat surface using the hinge out stand (C3), or wall mount using the wall mount
hole (C1).
• Place the remote sensor outside. It can be mounted in a similar way using the hinge out stand (D9) or wall
mount hole (D5).
Note: Transmissions between the main unit and sensor can reach up to 30m barring any interfering obstacles such as
buildings, trees, vehicles, high voltage lines, etc.
WEATHER FORECAST FUNCTION
• Your personal weather station displays an animation showing the current weather status.
• To pre-set the status setting, press and hold the WEathEr button (B7) for 3 seconds. The Weather Forecast icon (A2) will flash.
• To change the current weather status animation press the - (B9) or + (B8) buttons.
• Press the WEathEr button (B7) again to confirm your choice.
Note: The current weather status should be reset if there is a change of altitude.
There are 5 different weather status animations in the weather forecast:
Freezing or snow
6
rain slightly Cloudy Cloudy sunny