Preparing The Product For Use; Unpacking And Contents; Unpacking; Safely Disposing Of Packaging Material - Avigilon ES-HD-HWS Manual De Instrucciones

5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.

5.1 Unpacking and contents

5.1.1 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
5.1.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Housing
• Housing equipment:
• Allen wrench
• Spacers
• Cable glands gaskets
• Cable glands (x3)
• Bolts and screws
• Screws for camera
• Desiccant bag
(ES-HD-CWS-LG and ES-HD-CWS only)
• 24V AC cooling fan installed
• 12V DC cooling fan included
ES-HD-HWS/ES-HD-CWS/ES-HD-HWS-LG/ES-HD-CWS-LG
5.2 Safely disposing of
packaging material
The packaging material can all be recycled.
The installer technician will be responsible for
separating the material for disposal, and in any
case for compliance with the legislation in force
where the device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.
5.3 Preparatory work before
installation

5.3.1 Attaching the support

The product must be fastened with
suitable equipment. The fastening means
must guarantee the mechanical seal when
a force equal to at least 4 times the weight
of the device is applied.
5