GreenWorks Tools 4101302 Manual De Utilización página 7

GB
FR DE ES
of least resistance for electric current to reduce the risk
of electric shock. This tool is equipped with an electric
cord having an equipment-grounding conductor and
a grounding plug. The plug must be plugged into a
matching outlet that is properly installed and grounded in
accordance with all local codes and ordinances. Do not
modify the plug provided. If it will not fit the outlet, have the
proper outlet installed by a qualified electrician.
Improper installation of the grounding plug could result in a
risk of electric shock. The wire with green-colored insulation
(with or without yellow stripes) is the grounding wire.
Check with a qualified electrician or service personnel if
the grounding instructions are not completely understood
or if in doubt as to whether the product is properly
grounded. Repair or replace a damaged or worn cord
immediately. Only connect the product to an outlet having
the same configuration as the plug. Do not use an adapter
with this product.
Residual current device (RCD) protection should be
provided on the circuit(s) or outlet(s) to be used for the
air compressor. Outlets are available having built-in RCD
protection and may be used for this measure of safety.
If the air compressor is used with an extension cord,
ensure
the connection of the power cord of the tool and the
extension cord are not on the ground. Auxiliary devices
should always be plugged into the wall outlet and not at
the connection of an extension cord and the power cord
of the tool.
If a protected outlet is not available, do not use the
air compressor until an outlet can be changed or auxiliary
protection can be obtained. These auxiliary protection
devices are available at your local retailer.
SPECIFICATIONS
Air tank capacity
Air flow
Air pressure
Input
Tank pressure gauge
Regulatory pressure
gauge
Weight
Working environment
IT NL PT DA SV
WARNING
6 L
40L/min
6.8 bar max
230 V
50 Hz
40 mm diameter
40 mm diameter
6.8 kg
+5~40 °C
FI NO RU PL CS
English
Humidity
Altitude
Storage environment
Rated current
Motor speed
KNOW YOUR AIR Compressor
See figure 1.
The safe use of this product requires an understanding
of the information on the product and in this operating
manual as well as a knowledge of the project you are
attempting. Before using this product, familiarize yourself
with all operating features and safety requirements.
Carrying handle
The air compressor has a carrying handle for easy
transport.
Cord wrap
The cord wrap keeps the cord neatly out of the way for
storage.
Oil-free pump
The oil-free pump reduces the need for maintenance.
Pressure regulator knob
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose.
Quick coupler
The air compressor has a quick connect coupler
located on the side of the unit.
Regulatory pressure gauge
The current line pressure is displayed on the regulatory
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
Safety valve
The safety valve is designed to automatically release air if
the air tank pressure exceeds the preset maximum.
Tank pressure gauge
The tank pressure gauge indicates the pressure of the air
in the tank.
4
HU RO LV LT ET
< 50 %
≤ 1000 m
-25~+55 °C
2 A
4600 rpm
HR SL SK BG