TFA 30.3048 Instrucciones De Uso página 8

TFA_No_30.3048_Anleitung_02_21
TWIN – Wireless thermometer
Caution!
Risk of injury:
• Keep these devices and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious internal
burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Never use a combination of old and
new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses
when handling leaking batteries.
Important information on product safety!
• Do not expose your device to extreme temperatures, vibrations
or shocks.
• Protect it from moisture.
• The outdoor transmitter is protected against splash water, but is
not watertight. Choose a shady and dry position for the trans-
mitter.
5. Elements
5.1 Base station (Fig. 1):
A: Display for indoor and outdoor
A 1: Indoor and outdoor temperature
A 2: MAX/MIN values
B: Buttons:
Button front:
B 1: SEARCH button
14
28.02.2021 7:51 Uhr Seite 8
TWIN – Wireless thermometer
Buttons backside:
▲ button
B 2:
B 3: RESET button
▼ /°C/°F button
B 4:
B 5: ALERT button
C: Housing:
C 1: Wall mount hole
C 2: Battery compartment
C 3: Stand (fold out)
5.2 Outdoor transmitter (Fig. 2):
D 1: Transmission signal lamp
Button inside the battery compartment
D 2: RESET button
Housing:
D 3: Wall mount hole
D 4: Battery compartment
D 5: Stand (fold out)
6. Getting started
Insert batteries:
• Place both instruments on a desk with a distance of approxi-
mately 1.5 meter. Check that no other electronic devices are
close.
• Open the battery compartment of the transmitter by pulling the
battery compartment cover downwards (see marking) and lift up
the cover.
• Insert two new batteries 1,5 V AAA, ensure battery polarities are
correct.
• Close the battery compartment again.
• Open the battery compartment of the base station and insert two
new batteries 1,5 V AAA, ensure battery polarities are correct.
• A brief beep tone will sound and all LCD segments will light up
for a short moment.
• Close the battery compartment again.
15