Dismantling And Repairs - Festo DNCKE Serie Instrucciones De Utilizacion

DNCKE-.../KEC-...
8 Care and maintenance
If the clamping unit is dirty, clean it with a soft cloth.
S
Permitted cleaning agents are:
– soap suds (max. 60 °C)
– all non-abrasive agents.
9

Dismantling and repairs

Warning
Pre-stressed springs may expand suddenly when the unit is dismantled.
S Make sure that the clamping unit is not dismantled. Please contact our after-
sales repairs service for maintenance and repairs to the clamping unit.
Dismantling
Make sure that the work load has reached a stable position (e.g. at the lowest
S
point if fitted in a vertical position).
Exhaust the clamping unit.
S
Do not modify the settings of screws and threaded pins if there is no request to
S
do this in these operating instructions.
In this way you can prevent damage to your clamping unit at a later stage.
Festo DNCKE-.../KEC-... 0204NH English
31