Ec Declaration Of Conformity - Proxxon MICROMOT 50/E Manual De Instrucciones

Maintenance, cleaning and care
Attention:
Disconnect the mains plug prior to every ad-
justment, maintenance measure or repair!
note:
Every device is dirtied by dust when working.
Cleaning is therefore essential. To ensure a
long service life, however, the machine should
be cleaned with a soft cloth or brush after each
use.
Mild soap or other suitable cleaning agent may
be used in this context. Solvents or cleaning
agents containing alcohol (e.g. petrol, cleaning
alcohols, etc.) should be avoided, since these
can attack plastic casings.
The apertures required for cooling the motor
must always be kept free of dust and dirt.
accessories
For more detailed information on accessories,
please request our device catalogue from the
address specified on the last page in the war-
ranty information.
Please note in general:
Proxxon bits and cutters have been designed
to work with our machines, which makes them
optimal for their use.
We will not assume any liability whatsoever for
the safe and proper function of our devices
when using third-party bits and cutters!
service note
Please note: The mains power input may only
be replaced by our Proxxon Service Depart-
ment or a qualified specialist!
- 16 -

ec Declaration of conformity

Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product
Drilling and Milling Set with Micromot 50/E
Article No.: 28515
In sole responsibility, we declare that this
product conforms to the following directives
and normative documents:
eu eMc Directive 2013/30/ec
DIN EN 55014-1 / 09.2016
DIN EN 55014-2 / 01.2016
DIN EN 61000-3-2 / 03.2015
DIN EN 61000-3-3 / 03 2014
eu Machinery Directive 2006/42/ec
DIN EN 60745-1 / 01.2010
DIN EN 60745-2-23/11.2013
Date: 06.03.2017
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is iden-
tical with the signatory.
designation: