Conservation Of The Mixer Vmn 4; Diagnosis Of Abnormality And Solutions - Nogueira VMN 4.0 Manual De Instrucciones

Ocultar thumbs Ver también para VMN 4.0:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Conservation of the Mixer VMN 4.0

As important as preventive maintenance is the daily maintenance of the machine. This care consists
primarily of protecting the Mixer VMN 4.0 of the intemperies and the corrosive effects of some
products.
Follow these recommendations to ensure a long life for your equipment:
- Remove all waste products that remain inside the mixer.
- Make rigorous and thorough washing, dried in the sun after.
- Tighten bolts ans nuts in general.
- Retrace the painting at the points where the need arises.
- Lubricate the points listed on item Maintenance Instructions.
- Always keep the mixer in a dry place, protected from sun and rain. Without this care, there is no
conservation.

Diagnosis of Abnormality and Solutions

The following information is intended to help identify and correct any anomalies and dysfunctions. In
some cases, these problems may be caused by the machine where the mixer is inserted. Thus, the
cause and remedy will be sought in the technical documentation provided by the machine
manufacturer.
Abnormality
Accumulation of material
in the unloading belt
Out little material for
unloading belt
Irregular discharge
Troughs of supply are
very full
Troughs filled little supply
High temperature
bearings
Working temperature too
high
Causes
Low belt speed
Opening the window of
inappropriate discharge
The speed of the tractor is not
compatible with the discharge
flow
Low speed tractor
Excessive speed of the tractor
Oil level too low
Oil too old
Defective bearings
Oil level too high
Oil too old
Presence of impurities in the oil
VMN 4.0
Solutions
Increase speed of rotation of
the conveyor bringing the TDP
Increase discharge opening in
the window
Slow down the tractor, but keep
the proper rotation in TDP
Increasing the travel speed of
the tractor
Reducing the travel speed of
the tractor
Complete the oil level
Change oil
Consult a qualified technician
Check the oil level
Change oil
Change oil
29

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido