AMAZON COMMERCIAL B07RQWVPDT Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 1:
MARK DOOR
Fold the template at the dotted line and tape the template
onto the interior side of the door.
Mark hole for the location for the dead bolt and latch.
It is recommended that you be at least 38" from
NOTICE
the floor.
Step 2:
DRILL HOLES
Drill a 2-1/18" (54 mm) holes through door face as marked
for the dead bolt.
Drill a 1" (25 mm) hole as marked for the latch.
DRILL THE 2-1/8" (54mm) HOLE FROM BOTH
NOTICE
SIDES TO AVOID SPLITTING WOOD.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido