English; Safety Notes; Product Description And Specifications; Intended Use - Bosch GLM 50 Professional Manual Original

OBJ_BUCH-1444-007.book Page 12 Thursday, June 9, 2016 1:34 PM

12 | English

English

Safety Notes

All instructions must be read and observed
in order to work safely with the measuring
tool. The integrated protections in the
measuring tool may be compromised if the
measuring tool is not used in accordance
with the instructions provided. Never
make warning signs on the measuring tool unrecognisa-
ble. STORE THESE INSTRUCTIONS IN A SAFE PLACE AND
INCLUDE THEM WITH THE MEASURING TOOL WHEN GIV-
ING IT TO A THIRD PARTY.
 Caution – The use of other operating or adjusting
equipment or the application of other processing meth-
ods than those mentioned here can lead to dangerous
radiation exposure.
 The measuring tool is provided with a warning label
(marked with number 15 in the representation of the
measuring tool on the graphics page).
 If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
 If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
 Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
 Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
 Do not make any modifications to the laser equipment.
1 609 92A 1YM | (9.6.16)
 Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.

Intended Use

The measuring tool is intended for measuring distances,
lengths, heights, clearances, and for the calculation of areas
and volumes. The measuring tool is suitable for measuring in-
doors and outdoors.

Technical Data

14
Digital Laser Measure
Article number
Measuring range
Measuring accuracy (typical)
Measuring accuracy (typical
under unfavourable condi-
tions)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at
25 °C) approx.
– at 10 m distance
– at 50 m distance
Automatic switch-off after
approx.
– Laser
– Measuring tool (without
measurement)
Batteries
Rechargeable batteries
Battery life, approximately
– Individual measurements
– Continuous measurement
Weight according to EPTA-
Procedure 01:2014
GLM 50
3 601 K72 2..
A)
0.05–50 m
B)
1.5 mm±0.05 mm/m
B)
1.5 mm±0.15 mm/m
1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
D)
6 mm
D)
35 mm
20 s
5 min
2 x 1.5 V LR03 (AAA)
2 x 1.2 V HR03 (AAA)
E)
10000
E)
2.5 h
0.14 kg
Bosch Power Tools