Dtvp Linux Commands - Kingston DataTraveler Vault Privacy Guia Del Usuario

DTVP Linux Commands

Command
dtvp_about
dtvp_forgotpassword
dtvp_initialize
dtvp_login
dtvp_logout
*Note: To execute the DTVP Linux commands, you must open a "Terminal" application window
and navigate to the folder where each of the files exist. Each command must be preceded by
the following two characters: '
Document No. 48000012-001.A02
Syntax*
./dtvp_about
./dtvp_forgotpassword
./dtvp_initialize
./dtvp_login
./dtvp_logout
./
' (a period and a forward slash as indicated in the table above.)
DataTraveler
Description
Displays serial no., firmware, and application version of
DTVP
Can be executed whether user is logged into the DTVP
or not
Resets the DTVP and allows you to create a new
password
Can be executed only when user is NOT logged into the
DTVP device
(All data stored on the secure data partition will be lost)
Initializes the DTVP and prepares device for first use
Executed prior to first use only
Prompts for DTVP password to log user into secure data
partition
Can be executed only when user is NOT logged into the
DTVP device and only AFTER the device has been
initialized
Logs user out of DTVP and closes secure data partition
Can be executed only when user is logged into the DTVP
device
®
Vault - Privacy Page 29 of 29