Start-Up - ADE CK 2010 Instrucciones De Operación

Start-up

NOTE on material damage
− Use only the supplied mains adaptor.
In the event of a power outage, a 3 V CR2032 battery
ensures that settings made (e.g. alarm times) remain
stored for several hours. Upon delivery, the backup battery
is already inserted and is provided with an iso strip to
protect against premature discharge.
1. Unscrew the fastening screw of the battery
compartment cover on the underside with a fine
Phillips screwdriver.
2. Remove the battery compartment cover.
3. Pull out the iso-strip.
4. Replace the battery compartment cover and secure it
in place using the fastening screw.
5. Insert the plug of the supplied mains adaptor into the
9V 2A connection socket of the alarm clock.
6. Plug the mains adaptor into a socket that has a voltage
corresponding to that described under "Technical
Data".
CK 2010 digital alarm clock
35