Setting The Time - ADE CK 2010 Instrucciones De Operación

Setting the time

‚ If more than 15 seconds pass between two
button presses, the setting process is auto-
matically terminated and you have to repeat
it.
‚ If you hold the + / - buttons down in each
case, the run-up of the displayed values takes
place faster.
1. Press and hold the
flashes on the display.
2. Use the +/- buttons to select the desired time format.
If you choose the 12-hour time format, morning hours
will be marked with "A" and afternoon hours with "P" on
the display.
3. Press the
4. Proceed as described above to make the following
settings one after the other:
− Set hours
− Set minutes
− Temperature unit (°C or °F)
5. Finally, press
36
button until "24 Hr" (or "12 Hr")
button to confirm the selection.
in order to complete the process.
CK 2010 digital alarm clock