Risk Levels; Installation; Unpack The Machine; Install The Battery Pack - GreenWorks Pro SN60L611 Manual Del Operador

EN
Symbol
5

RISK LEVELS

The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM- SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
6

INSTALLATION

Do not change or make accessories that are not
recommended by the manufacturer.
Do not connect to power supply until you assemble all
the parts.
6.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine
before use.
Explanation
Stay away from moving parts.
Keep all guards and shields in
place.
Keep feet out of impeller. Keep
feet away from rotating impeller.
Stop the motor and remove the
battery before leaving the product.
MEANING
Indicates an imminently
hazardous situation,which,
if not avoided, will result in
death or serious injury.
Indicates a potentially haz-
ardous situation,which, if
not avoided, could result in
death or serious injury.
Indicates a potentially haz-
ardous situation, which, if
not avoided, may result in
minor or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
WARNING
WARNING
WARNING
English
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
6.2

INSTALL THE BATTERY PACK

• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the engine stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1. Open the battery door(1).
2. Align the ribs on the battery pack(2) with the
grooves in the battery compartment.
3. Push the battery pack(2) into the battery
compartment until the battery pack(2) locks into
place.
4. When you hear a click, the battery pack(2) is
installed.
5. Close the battery door(1).
6.3

REMOVE THE BATTERY PACK

1. Open the battery door(1).
10
WARNING
2
3
WARNING
1