Warming Up - Kawasaki KRH300A Manual Del Propietário

18 OPERATING INSTRUCTIONS
NOTE
Should the engine fail to start, do not try to pull the
recoil starter grip too many times with the enrichment
lever at the "Starting" position. This will cause the fuel
to flood into the cylinder and make starting even more
difficult. In this case, set the enrichment lever to the
"Running" position and repeat the starting procedure.
After starting, vary the engine speed a few minutes.
A. Enrichment lever

Warming Up

After starting the engine, run the engine at the idling
speed (throttle lever position is fully CLOSED) for a few
minutes.
Allow sufficient warm-up time to prevent engine
damage. The hand held blower should be run at
idling speed for 3 to 5 minutes to allow it to warm
up before applying a load. This will allow oil to
reach all engine parts, and allow piston
A
clearance to reach design specifications.
CAUTION