Troubleshooting Guide - Kawasaki KRH300A Manual Del Propietário

If the engine malfunctions, carefully examine the symptoms and the operating conditions, and use the table below as
a guide to troubleshooting.
Symptom
Engine won't Insufficient
start or output compression
is low
No fuel to
combustion
chamber
Spark plug
fouled by
fuel
No spark or
weak spark
Low output Engine over-
heats
K: Service should be performed by an authorized Kawasaki dealer.

Troubleshooting Guide

Probable cause
Faulty Piston, Cylinder and Piston ring
Loose spark plug
Loose cylinder bolts
No fuel in fuel tank
Blocked fuel filter or tube
Blocked air vent in tank cap
Faulty carburetor
Over-rich fuel/air mixture
Clogged air cleaner
Faulty carburetor
Incorrect grade/type of fuel
Water in fuel
Faulty spark plug
Faulty ignition coil
Engine switch left in "O" (Stop) position
Clogged air cleaner
Recoil starter or cooling air path
clogged with dirt.
Carbon built-up in combusition
chamber
Poor ventilation around engine
TROUBLESHOOTING GUIDE
Remedy
K
Tighten properly.
Fill fuel tank.
Clean.
K
Rotate engine with spark plug
removed to discharge excess fuel.
Clean spark plug.
Clean.
K
Change gasoline.
Replace spark plug.
Replace spark plug.
K
Turn engine switch to "l" (Start) position.
Clean.
K
Select a better location.
27