Bond NorthWoods TableFire HYUTT50001-5 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
1. Check that the ignition control knob (N) for
the gas supply system is turned to the "OFF"
position before starting any assembly,
N
2.
Unscrew and remove the cap on the
D
electronic igniter (D), then place in the
AA battery (J) into the battery slot. Be
sure the positive side of the battery
faces outwards. Replace the electronic
igniter cap over the battery; be sure to
tighten securely.
J
C
3.
F
(F) from the threaded post, then
P
4 M6X15 screws (P). Be sure to tighten
securely.
C
E
Bond Manufacturing Co., Inc. | Page 6