Nightlight On/Off; Switching To Another Lullaby - Philips AVENT SCD525 Manual Del Usuario

less energy, but still ensures that you can always hear your baby clearly without any distracting noise.
Using the baby monitor in the ECO mode helps you to preserve the environment.
Note: The operating range of the baby monitor when it is operated in the ECO mode is 260 meters in
open air. Depending on the surroundings and other factor that may cause interference, this range may be
smaller.
1 Select 'ECO mode' with the + and - buttons (Fig. 30).
2 Press the OK button to confirm (Fig. 31).
3 If the ECO mode is off, the display shows 'On?'. Press the OK button to switch on the ECO
mode. If the ECO mode is on, the display shows 'Off?'. Press the OK button to switch off the
ECO mode.
If you have set the ECO mode to 'on', the parent unit switches off and on again. The ECO
,
mode symbol appears on the display of the baby unit and the parent unit to indicate that
both units now operate in ECO mode.
Note: The connection between parent and baby unit may be lost when the ECO mode is switched on. If
this happens, the operating range may be too large for the ECO mode. In this case, either reduce the
operating range or switch off the ECO mode.

nightlight on/off

1 Select 'Light' with the + and - buttons.
2 Press the OK button to confirm.
3 If the nightlight is off, the display shows 'On?'. Press the OK button to switch on the
nightlight. If the nightlight is on, the display shows 'Off?'. Press the OK button to switch off
the nightlight.
lullaby function
Selecting a lullaby
1 Select 'Lullaby' with the + and - buttons.
2 Press the OK button to confirm.
3 Press the + button once or several times to select one of the five lullabies from the list or to
select 'Play All'.
4 Press the OK button to confirm.
When you have selected one of the five lullabies, it is played 5 times in a row.
When you select 'play all', all 5 lullabies are played once.

Switching to another lullaby

1 Press the + button to choose another lullaby from the list.
2 Press the OK button to confirm.
pausing a lullaby
1 Press the OK button.
The message 'Paused' appears on the display.
,
2 Press the OK button again to resume the lullaby.
If you do not continue the lullaby within 30 seconds, the lullaby function switches off automatically.
The message 'Paused' and the lullaby symbol disappear from the display.
EngliSh
13