Before You Begin; Important - oneConcept 10032327 Manual Del Usario

EN
22

BEFORE YOU BEGIN

WARNING: Danger of scalding
The steamer and accessories get very hot during use, always allow them
to cool down before handling.Always unplug and switch off the steamer
when assembling. Always switch off the steamer before emptying the
water tank or changing the pads/accessories.
• IMPORTANT: Please refer to floor manufacturers care recommendations before use
and test the steamer on a hidden
• area of flooring to begin with. Test for color fastness in a small hidden area of
upholstery/fabric to check for color removal before use.
• When using the steamer, basic safety precautions should always be observed.
Don't aim the steamer at people, animals, plants and electrical components or
wires. Never touch the steam jet or floor head from a short distance (there is a risk
of scalding). The steamer is equipped with a thermostat and a thermal cut-out. If
for any reason the steamer overheats it will switch off . If this happens turn off and
unplug the steamer, allow to cool for a least 2 to 4 hours and re-try.
Push the main body
down into the floor
head until
it clicks into place.
Stand the stick steamer
upright by pushing the
main body forward to
lock into position.
Push the handle down
into the main body until
it clicks into place.