oneConcept 10032327 Manual Del Usario página 25

Move the steam
cleaner slowly
backwards and
forwards across
the floor, paying
particular attention
to high traffic
areas.
IMPORTANT: When using on carpets, always make sure the pad is used and covers
the floor head entirely before using the carpet glider. Only use the carpet glider when
refreshing carpets and press the detergent pedal to OFF.
Refreshing your carpets
Place the pad on
the floor head,
white side facing
up. Make sure the
pad covers the
entire floor head.
Plug into the
mains, the light
will illuminate to
indicate the power
is on.
Place your foot
onto the floor
head and pull the
handle backwards
to recline.
Switch off and allow
to cool. Hold corner
of pad down with
you foot and lift
steam to peel away.
With the pad attached, hook
floor head into the front of the
carpet glider and push down to
clip into place. The carpet glider
should only be used when
refreshing carpets.
Press the detergent
pedal on the floor
head to OFF when
refreshing carpets
To produce steam
squeeze the trigger
in short bursts. Do
not hold the trigger
continuously to
prevent over wetting
your floors.
EN
25