KENMORE ELITE 795.7802 Manual De Uso Y Cuidado página 25

REFRIGERATOR INSTALLATION
18. Flip the middle hinge bracket and position on left side
of refrigerator. Re-attach with two bolts and a screw.
19. Place freezer door down on bottom hinge pin.
Bottom Hinge Pin
20. Reattach middle hinge pin using a ¼ in. socket
wrench. Replace washer.
Middle Hinge Pin
Washer
NOTE: Bracket has been flipped, but hinge pin stays in
the same orientation with its hexagonal end facing
upward.
21. Insert the decorative screw into the outer hole on the
right side of the housing. Attach cover on the right
side. Cover is force-fitted.
1_MFL67855601_Eng.indd 24
Middle Hinge Bracket
Decorative
Screw
22. Loosen the two screws and remove the left hinge cap.
23. Place the refrigerator door down over the hinge pin on
the middle hinge pin bracket.
NOTE: The left top hinge, left hinge cover and right hinge
cap are provided for reversing doors.
24. Line up the left top hinge with the holes in the top of
refrigerator. Use the three bolts to replace the hinge.
Replace the left hinge cover and insert the two screws.
25. Replace the right hinge cap and insert the two screws.
24
2013.7.25 8:51:45 AM