Battery Charger Set-Up; Testing The Battery - JMP 800 6V Manual Del Usario

Battery charger set-up

The battery charger can be set up in three different positions.
As a stationary unit

Testing the battery:

• Connect the terminals to the battery (red terminal to plus, black terminal to
minus).
• The battery charger now determines and indicates the condition of the bat-
tery. The battery should be warmed to room temperature (20 degrees) and
not charged any more for at least 4 hours prior to testing to ensure indication
of a correct result.. The charging status indicated will otherwise be too high!
As a mobile unit
Black terminal to "-"
58
As a wall-mounted unit
Red terminal to "+"