Entrée Filaire' ['WIred Input'] Tab; Recherche Video [Video Search] Section; Appareil [Device] Section; Système [System] Section - THOMSON 512323 Manual De Instrucciones

Plug and Play 16 channel colour
network Video recorder
2.1.4 - 'ENtrÉE filairE' ['WirEd iNput'] tab
Here you will find the settings for motion detection
and for activating one of the recorder's wired inputs:
area to monitor on the screen, sensitivity, channels
to record if motion is detected.
Important Note: video recording triggered by the
detection of motion is not activated here but in the
'Paramètre' [Parameters] menu, 'Enregistrement'
[Recording], 'Programmation' [Programming].
(Please refer to paragraph 2.7 "Motion
detection settings" for more details.)
2.2 - 'RECHERCHE VIDéO' [VIDEO SEARCH]
SECTION
The video search section provides access the
videos recorded on the device's hard disk.
Searches can be carried out using the calendar or
file list.
Video search:
d - CONFigurATiON
Event Search:
2.3 - 'APPAREIL' [DEVICE] SECTION
The Device section shows the current status of the
device's hard disk and gives the option of formatting
it.
Warning: formatting deletes all of the data recorded
on the disk.
2.4 - 'SYSTèME' [SYSTEM] SECTION
The System section provides access to the
recorder's basic settings:
2.4.1 'gÉNÉral' [gENEral] tab
Here you will find:
• The General tab, which allows you to set the date
and time, time and date format, and display
language.
EN
13